Installation Instructions for a Smart Toilet
An Ceramic Intelligent Toilet. Heated seats, bidet amenities, and even automatic lid opening and shutting are among the conveniences it offers. Even while installing an intelligent toilet might sound frightening, if you follow these instructions, it can be a simple task.
How to Install An Ceramic Intelligent Toilet – 7 steps
First Step: Get Ready for Installation
Ensure you have all the required tools and equipment before installing your smart toilet. You will require:
- A power outlet, a water supply line, an intelligent toilet, a screwdriver, a wrench, and Teflon tape.
Make sure your toilet is close to the water supply line and the power outlet.
Remove your old toilet in step two.
You must uninstall your old toilet before installing the intelligent toilet. Turn off the water supply valve first, then flush the toilet to drain any remaining water. The nuts holding the toilet to the floor need to be removed with a tool.
Lift the toilet with care, then set it down on a blanket or an old towel. Given that the toilet can be hefty, you might wish to get some assistance.
Step 3: Attach the Anchor Bolts and Wax Ring.
There are no leaks between the toilet and the floor thanks to the wax ring’s seal. Put the wax ring on the floor’s flange. Ensure that the wax ring is level and centered.
The anchor bolts should be inserted into the flange and tightened by applying pressure. Verify their levelness and alignment with the toilet’s bolt holes.
Step 4: Put the mounting bracket in place
An attached-to-the-floor mounting bracket is included with your smart toilet. The mounting bracket should be fastened to the anchor bolts using your screwdriver.
Connect the water supply line in Step 5
Connect the toilet’s water supply line. To ensure there are no leaks, use Teflon tape. Utilizing a wrench, tighten the connection.
Install the smart toilet in Step 6
Place the attachment bracket for the smart toilet with care. Ensure that it is secure and level. The power cable should be connected to the outlet.
Step 7: Check the bathroom.
Test the toilet after opening the water supply valve. Make sure all the features, including the heated seat and bidet, are operational and check for leaks.
Congratulations, you’ve finished installing your smart toilet!
Conclusion
Although installing an intelligent toilet may seem difficult, it may be simple with the correct equipment and planning. You may quickly take use of the opulent features of an intelligent toilet by following these simple steps.